FoodNet

A manual of home-making

1919

Page 215

Presented as published in 1919. Historical recipes may not meet modern food-safety standards. Cook from the modern interpretation, not the original instructions.
For a combination, the corset-cover may be gathered into a straight band cut lengthwise of the material, and the drawers set into the lower edge of the band. Drawers may be finished with a straight band cut length- wise of the material, with a bias facing for a flat, smooth finish, or with a yoke. FiQ. 95. — Bound placket. Fio. 96. — Bound and faced placket. Fio. 97. — Continuous bound and faced placket with fly. An underskirt may be finished with a straight band cut length- wise of the material, with a bias facing for a flat, smooth finish, or with a yoke. Plackets and closings for undergarments. A corset-cover may have a plait ^/a to Vs inch wide on the right side for buttonholes, and a hem ^/s to '/i inch wide on the 380 A MANUAL OF HOME-MAKING Flo. 9b, — ^Two met bods of makiu^ a benixij«xl pluckct. FkO. 90.— Methods of marking i>ositkns of tNiUonholea. iii£ a buttonhole. Fiu. 100.— .A nnd B, Mf«tb- ijdti of «tratidiii4i but- tonliuim; C. oveiviist- Fia. 101. — A, Button- hot** «titrh; B. bat- tonholp with fun and hiLr; t\ double*- bar buttonhole. L THE MAKING OF CLOTHING left side for buttoas; or it nmy liavc ll plait and fly for button- holes on tlie right side and a hem for buttons on the left side. Open drawer's may be finished with bias facings. Closed or circular drawers may be finished with a continuous bound placket (Fig. 95), a continuous bound and faced placket (Fig. 96), or a continuous bound and faced placket with a tly (Fig. 97). An underskirt may be tinished with a continuous; bound placket, a continuous Ejound and faced placket, a continuous bjund and faced placket with a fly or a henmied placket (Fig. 98). Fasknings for tindergarments (Figs. 99-101). Buttonholes and buttons are the best fastenings for most undergarments because they hiundcr well, wear well, and may be an interesting part of the design of the closing of a garment. Single-bar buttonholes are fan-shaped at one end and have a bar finish at the other. They are generally used wliere there Ls a strain; the button rests in the fan-shaped, or rounded, end of the l>uttonhole. Doul»le-l>ar buttonholes have the bar finish at both ends. They are generally placed vertically in the gannent and are used where there is not much strain and where the button slips up and down in the buttonhole, To sew on liuttons, the stitches should be taken over a pin placed on the top of the button. The pin should then be re- moved and the thread wound several times around the stitches between the l>utton and the gaiTnent to make a thread neck or shank which liolds tiie button up from the material, making raom for the buttonhole and giving the faistening greater strength. CLOTHING FOR CHILDREN (bY JULIA GLEASOn) The children's garments described in this chapter are chosen f>ecause of simplicity and durability of design and material, and economy of time and money in making them. In making or selecting garments for children of any age the following points should be considered: 1. Hygiene. The garment should be such that it can be easily cleansed, it should not restrict body development in any I L I I 382 .4 MANUAL OF HOME-MAKING d